Soluble Resistance Cracking Rod with High PFA Rod

• Material: PFA/PTFE
• Kind: Transparent Plastic
• Water Absorption: 1.5%~3.5%
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: All can be customized
• Contraction Percentage: 1.5%~5.0%
• Tensile Strength: 30~40MPa
• Exterior: Clarity/Transparency
• Raw Material: 3m Solvay
• Applicable Temperature: -200 Degrees to +260 Degrees
• Performance Feature: Solubility Resistance
• Transport Package: Carton
• Specification: All can be customized
• Trademark: Fluorway
• Origin: China
• HS Code: 3904610000
• Production Capacity: 10000pieces/Year
• Package Size: 40.00cm * 30.00cm * 20.00cm
• Package Gross Weight: 5.000kg

Product Description

PFA physical properties

 

1. Perfluoropropyl perfluoroethylene ether and polytetrafluoroethylene copolymer. Compared with polytetrafluoroethylene, the properties of the resin may be more than ordinary thermoforming direct processing
2. Its creep resistance and compressive strength are better than PTFE, high tensile strength, elongation up to 100-300%, good dielectric properties and excellent radiation resistance, high flame retardant,
3. Long-term use temperature -80-200 degrees, excellent chemical corrosion resistance, all chemical corrosion resistance of the pad, friction coefficient in plastic, and good electrical performance, its electrical insulation is not affected by temperature.
 

 

When choosing the right fluoropolymer for your process, consider some significant performance differences between the two fluoropolymers. The difference in alkoxy substituents allows PFA to be fused by conventional injection molding and screw extrusion techniques, while PTFE cannot. The PFA is more flexible, but has a lower flexural life, so it cannot withstand the ability to fold repeatedly. PTFE has slightly higher heat resistance, but is lacking in comparison to fluidity, creep resistance, and thermal stability. The melting points of PFA and PTFE are 260°C and 327°C, respectively. Although PFA has better salt spray resistance, water absorption and weather resistance have a greater impact on PFA than PTFE. Finally, the most significant difference between the two is that the dielectric strength of PFA is 3-4 times that of PTFE.
 

 

Our Advantages

Support customization: The product is non-standard customization, if necessary, please send the specifications to customer service
Exquisite workmanship: All products are strictly tested and selected materials are durable and stable in performance
Strong and durable: tensile resistance, wear resistance, low temperature resistance, high corrosion stability
Strict material selection: low friction coefficient, good self-lubrication, high strength wear-resistant material
 

 

 

Detailed Photos

 

 

PFA Features

 

PFA Features:
1 Crystallized material, small moisture absorption. It can be processed into products by the processing method of thermoplastics
2. Poor liquidity, easy to decompose.
3. Translucent particles, injection molding, extrusion molding. Molding temperature 350-400ºC
 

Storage workshop

 

 

rod application

PFA rod is widely used in various applications such as corrosion-resistant and sealing components, anti-adhesive and transparent parts, insulation for capacitors, corrosion-resistant water pump heads, valves, fittings, sealing components, high-temperature sealing components, corrosion-resistant parts, wear-resistant and friction-reducing components, insulation components, and medical device parts.
 

 

     
                     power sector                                         new energy                                                 automobile making

 

Product Parameters

PFA Physical property table
physical properties	rated value	system of units	measurgin method
specific gravity	2.14	g/cm³	ASTM D792
Melt rate(372ºC/5.0kg)	18-25	g/10min	ASTM D1238
water absorption(24hr)	0.030	%	ASTM D570
hardnessl	55-65	-	ASTM D2240
melting temperature	302-310	ºC	-

 

Water Absorption:	1.5%-3.5%
Shrinkage Percentage:	1.5%-5.0%
Compressive Strength:	41-50MPa
Elongation at Break	100%-300%:
Operating Temperature:	-200ºC-+260ºC
Material Characteristics: Resistant to all strong acids and alkalis.

 

PFA rod size

 

diameter	maximum diameter	diameter	maximum diameter
5	6	55	56
12	12.7	60	61
15	16	65	66
20	22	70	71
25	26	75	76
30	31	80	81
35	36	85	86
40	41	90	91
45	46	95	96
50	51	100	101

Frequently Asked Questions
1. Q: How long does the sample take? Is the sample free?
A: Usually 2-5 working days: For our stock products, it is free of charge, but shipping fee is charged. Samples are made according to your requirements, but the sample fee is refundable for bulk orders.

2.Q: How to confirm the customized products?
A: We can customize different sizes according to your requirements, firstly make samples and provide them to you.

3,Q:What is your minimum order quantity?
A: Usually our minimum order quantity is 1000 meters per piece, but if you need different sizes of products with different specifications, our minimum order quantity can be 100 meters per order, with no less than ten pieces of each style and each specification.

4, Q: How to know the price?
A: Price is the most important concern of every customer. If you want to know the price, you need to know the following details: product specifications, size, thickness, diameter, outside diameter, inside diameter, etc. These are the main factors that determine the price. The more you order, the lower the unit price you will get!

5. Q: What is your packaging?
Packing: The products are packed in cartons, there is one tube in a carton, we can do any other packing according to your requirements.

6. Q: What is your delivery time? Where is the shipping port?
A: Our delivery time is usually one month in peak season, 15 working days in low season, and the shipping port is Shanghai.

7. Q: What are your payment terms?
A: For orders less than 3000 dollars, full payment.
If the order is more than 3000 dollars, 50% prepayment and 50% before shipment.

8.Q: After-sales service?
A: We promise that if there is any quality problem different from the description of mass production, we will take the responsibility of the defective goods.

Q:Could you tell me something about your company
A:Fluorway Polymer Materials (Shanghai) Co., Ltd., located in Shanghai, China, is an enterprise situated within the national G60 Science and Technology Innovation Park. We specialize in the production and domestic and international sales of high-performance fluoroplastic semi-finished materials and precision processed components.Additionally, we provide MSDS reports to ensure the safe use of our products and help buyers mitigate any potential chemical incidents during usage and transportation. With over 20 years of experience in this industry, our company boasts a strong team of technical engineers and sales professionals.